1 = +v Unregulated (Same as the PSU input)
2 = PIC chip pin 52 (PGC)
3 = +V Regulated
4 = GND
5 = PIC chip pin 47 (PGD)
6 = PIC chip pin 9 (Program Voltage (nMCLR))
7 = Unit RX
8 = Unit TX
The stock RJ45-USB cable uses pins 1,4,7,8. I suspect you don't need 7 to just read the output of the meter, but you definitely need both 1 and 4.
Note to self: current setup
Input:
1 = 1 CC128
2 = 4 CC128
3 = n/a
4 = Phone
5 = Phone
6 = n/a
7 = 7 CC128
8 = 8 CC128
No comments:
Post a Comment